Level Indication

KENCO Flat Glass Gauges are used where direct visual observation of process fluids is required. These gauges are suitable for a wide range of applications with pressures up to 4000psig at 100ºF, and temperatures up to 750ºF at 2300psig. KENCO gauges are available in a wide variety of construction materials, connections and other options to meet most specifications.

KENCO Flat Glass Gauges are used where direct visual observation of process fluids is required. These gauges are suitable for a wide range of applications with pressures up to 4000psig at 100ºF, and temperatures up to 750ºF at 2300psig. KENCO gauges are available in a wide variety of construction materials, connections and other options to meet most specifications.

The KENCO Magna-Site™ is a magnetic liquid level indicator used to determine the volume of liquid contained within a vessel. Because the Magna-Site™ eliminates the need for glass, high pressure applications and hazardous locations are protected from the danger of a chemical spill due to glass failure.

The patented K9900 Series Level Gauge features an innovative casting design which will simplify the installation process and eliminate other typical problems associated with gauge glass. The K9900 Series incorporates floating misalignment unions, which will allow the process connection center lines to vary +/-1/4. The gauge also has integral offset pattern valves with ball check shutoffs. 1/2 FNPT vent and drain connections are inline for routine sight glass maintenance. The K9900 Series Level Gauge delivers a safe, low maintenance, cost effective solution to common sight glass applications.

The 8800 Series Level Gauge features 90° connections for ease of installation. The Gauge is fitted with inline 1/4 FNPT vent and drain connections. Because the vent and drain connections are inline, glass cleaning is easy. The center line dimensional tolerance is 1/16. This assures that the gauge will fit the mounting connection of the tank. The sight tube of the 8800 Series Level Gauge is totally protected. Three sides of the gauge are enclosed with a metal frame, while the face of the gauge is protected with a polycarbonate shield.

The 5700 Series Gauge provides a visual means for checking the contents of a bulk tank and a means for checking the injection rate of a chemical metering pump. The gauge is designed to operate in low to medium pressure applications up to 500 psig.

The KENCO close-mount level gauge is ideally suited for applications in which the level gauge must be mounted with a minimum of protrusion from the tank. Typical applications include offshore or corrosive atmospheres, packaged hydraulic equipment, steel mill pumps, surge tanks, radiator fluid levels.

The 17000 Gauge functions as a level indicator and also serves as a pump setting gauge. The rate scale can be calibrated in a variety of options, such as GPM, GPH, GPD, LPM, LPH, or LPD. The maximum pump rate for a 12" gauge section is 25 GPD. The sight tube in the 17000 is 1" O.D. glass, which makes it ideal for viscous fluids. The top and bottom connection for this gauge is 1" MNPT.

The KENCO Armored Level Gauge (Model ESP or ST) is a rugged tubular liquid level gauge that offers maximum impact from mechanical stress and impact. Product benefits include lower installation costs, reduced maintenance, unobstructed visual indication for your application. The gauge is adaptable to many different types of process connections.

Safeguard gauge replaces tubular glass that is mounted between tubular gauge glass valves. The packing nut on the tubular valve tightens around the metal nozzles of the Safeguard gauge, not glass. Nozzles match the O.D. of 5/8" glass or 3/4" glass.

The Environmental Protection Gauge (EPG) is easy to install. It installs just like tubular glass and is designed to replace your existing tubular glass. It will eliminate glass breakage and stop costly spills.

The KENCO Tubular Valve (KTV), when used with a KENCO Safeguard Level Gauge or KENCO EPG Level Gauge, provides maximum operator safety and environmental protection from a potential gauge glass failure. The KTV is designed for service in low to medium pressure applications up to 500 psig.

Kenco offers a variety of calibration gauges to meet most all applications. Pump setting gauges allow you to set your rates for chemical injection. Please contact Phoenix for more information.

KENCO Flat Glass Gauges are used where direct visual observation of process fluids is required. These gauges are suitable for a wide range of applications with pressures up to 4000psig @ 100°F, and temperatures up to 750°F @ 2300psig. KENCO gauges are available in a wide variety of construction materials, connections and other options to meet most specifications.

The KENCO Oil Supply Tank & Stand System is designed to supply lube oil to the crankcase of a compressor or engine in an isolated location where daily supervision and maintenance are an impossibility. KENCO Oil Supply Tank & Stand Systems used in conjunction with our Oil Level Controllers with low level switches can provide 24 hour protection from lubrication failure. Oil Supply Systems are available in 5, 16, 30 and 55 Gallon capacities.

The KENCO Magna-Site is a magnetic liquid level gauge used to determine the volume of liquid contained within a tank. Because the Magna-Site eliminates the need for glass, high pressure applications and hazardous locations are protected from the danger of a chemical spill due to glass failure.

The patented K9900 Series Level Gauge features an innovative casting design which will simplify the installation process and eliminate other typical problems associated with gauge glasses. The K9900 incorporates floating misalignment unions, which will allow process connection center lines to vary +/- 1/4".

The SOR® 1100 series magnetic level indicator leverages decades of experience building pressure vessels and pairs it with an industry leading indicator design to provide clear and reliable indication of any process liquid.

The Kenco Manifold Kit simplifies the installation of a metering pump and a Kenco calibration gauge to a chemical storage tank. The manifold integral ball valve and strainer minimizes assembly, leak paths and installation time. The butterfly handles on the ball valves allow the manifold size to be very compact.

Full View Sight Flow Indicators are used to observe the flow of liquids in a piping system. 360° visibility provides convenient viewing from any angle. Designed for vertical applications. Threaded and flanged connections are available in a variety of sizes to match the diameter of the pipe being used. A wide range of end plate materials are available. Units can be made with any overall length if additional visibility is required.

KSF Cast Body Sight Flow Indicators have a heavy duty cast construction to handle pressure and temperature requirements. A glass window on either side provides product visibility. Mechanical indicators to enhance the visibility of the media include flappers, rotors, and drip tubes. The cast body and threaded or flanged connections meet ANSI standards. Standard materials of construction are carbon steel, 316 SS, ductile iron, and bronze.

Armored Sight Flow Indicators are used to observe the flow of liquids in a piping system. A rigid steel housing surrounds the sight tube and provides additional strength and protection from mechanical impact. Threaded and flanged connections are available in a variety of sizes to match the diameter of the pipe being used. A wide range of housing materials are available.

Sight Windows are an effective and economical way of viewing tank, pressure vessel, piping system interiors. They are also referred to as Sight Glasses and are often replaceable or removable. Fluid clarity, color, level and flow can be monitored through the window. Sight Windows can be mounted by bolting, welding or direct insertion into the end of the tank or pipe.

The BelGASCP P8900 Visual Indicator measures the liquid head pressure in atmospheric (vented) vessels. The P8900 Visual Indicator constantly indicates the liquid level in the vessel. The liquid level of the vessel is displayed on the P8900 in feet and inches.

The BelGASCP P8900 Single Switch Indicator measures the liquid head pressure in atmospheric (vented) vessels. The liquid level of the vessel is displayed on the P8900 in feet and inches. The P8900 Single Switch Indicator can be calibrated with high and low set points. These set point adjustments complete a circuit to trigger any connected device.